For more detail on each setting and its function, refer to the IP Audio Products with Host Deployment Guide on the Savant Customer Community. The subsections below describe recommended settings for optimal calibration of a Smart Audio Soundbar system, including connected WiSA subwoofer(s) and surround speakers.
NOTE: Surround speakers should be placed to the left and right rear at approximately 110º to 120º angles relative to the center channel. Surrounds must be plugged in to a power outlet, and should be placed behind the primary seating for the room as shown in the example below. Use of the optional speaker stands available from the Savant Store for Savant WiSA Surround Speakers is recommended. Savant WiSA Surround Speakers have optional speaker stands that are recommended. Select the settings below on the bottom panel of the Nano Subwoofer: This type of placement, sometimes referred to as “corner loading”, returns the greatest output across the widest possible frequency range.ĭistance should be measured from the sub placed furthest from the ideal listening position when completing the calibration tab of the Web UI described below.Īll bass settings, such as crossover and gain, are managed through the Soundbar. When using a single subwoofer, it should be placed in or near a corner boundary. Using multiple subwoofers placed in diagonally opposed corners yields the most even in-room bass response. Savant recommends using two subwoofers in a system. Surround speakers should be placed slightly behind the direct right and left of the listener at approximately head height. Two Subs: The subs should be placed in opposing corners of the room as shown. One Sub: Ideal location is in one of the front corners of the room. With the middle of the center channel directly in front of the listener. Ideally, the Soundbar should be mounted directly below the TV. This is the location of the prime listening/viewing position. The diagram below shows an example of the ideal placement for a five channel Smart Audio Soundbar system. When considering the placement of speakers within a room, there are a number of relevant factors to take into account such as the size and shape of the space, and the location of available power outlets.
Savant Smart Audio WiSA Sub 1 Quick Reference Guide Speaker Placement.Savant Smart Audio WiSA Surround Speakers Quick Reference Guide.Savant Smart Audio WiSA Soundbar Quick Reference Guide.Savant IP Audio Products with Integrated Host Deployment Guide.These documents can be found on the Savant Customer Community. This is a list of documents that may need to be referenced for installation or setup. For best results the Smart Audio Soundbar should be connected to the network using it’s RJ45 Ethernet connection.With all HDMI sources routed to the display.
#Sonance soundbar tv
If there is more than one video source the TOSLink output of the TV is the recommended way to get the audio signal to the Soundbar. The Smart Audio Soundbar receives its Surround Sound signal from its TOSLink input.
0 kommentar(er)
